What is a surge protector power strip?

Your house and office can be gone in a blink of an eye to fire if there is a power surge. Your electronics and devices can turn into liabilities if you are not going to do something to protect them from harm. You need to figure out a way to safeguard your place from any possible problems, and a surge protector power strip will help you do that. A surge protector gives you protection against many different things such as electronics, equipment, switches, and more. It is a simple device that helps to protect you against sudden surges of electricity. To help you out, below are some things you would need to do when planning to get one.

Number of ports

You should not just assume that all surge protectors have the same number of ports. There are many different types out there, from 6 to 8 and even 12 ports, so that you can use them depending on how many you need. Making sure that you buy one with the right number of ports helps prevent any type of problems, especially daisy chains. This is a good start when you buy a new surge protector for your place.

Plugging in

You will also need to consider the device or appliances you will be using with your surge protector power strip. This is because you want to make sure that you will have the right amount of joule count when it comes to choosing. For things that will only be using a small number of watts, you will have to consider if you plan to buy something for the long term or just for some months, and you will be able to replace it easily.



Because depending on the features of the surge protector that you will buy, the price will also change; you will need to figure out how and what to do with it. If you happen to be on a low-budget, then something temporary should do until you buy something that will last longer. It is a matter of figuring out which ones cost best for your budget so that you can still enjoy using them and being safe with one.

Absorption rating

You will also need to know the absorption rating of your surge protector so that you can know how much energy it can absorb. You will want something around 700 joules or higher so that you will be able to use it for some time without it turning into a regular power strip. You can also check the clamping voltage that you will get and try to look for something less than 400, as the lower the volts, the better it is.


Last but certainly not least, knowing that your surge protector power strip has a warranty is something you should be happy about. You should check regarding the warranty and see how long it will last so you can file a claim in case the device does not function as it is supposed to be.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.