Heavy-Duty Metered, Filtered & Rack-Mount Metal Power Strips
Whether you are wiring a 19-inch homelab rack, isolating studio monitors from AC line noise, or running high-draw tools on a dedicated 20A shop circuit, ordinary plastic strips and bare-bones metal bars leave you guessing. Every model in this CRST lineup shares a 1.5 mm extruded-aluminum chassis, spot-welded 0.5 x 6 mm (3 sq mm) solid copper bus bars, high-retention phosphor bronze contacts, a 6 ft heavy-duty power cord, a flip-guarded resettable overload breaker, 4 M6 rack screws and 4 cage nuts, and ETL Listed safety certification to UL 1363 & UL 1449.
CRST 12-Outlet Filtered & Metered 2U Metal Power Strip with 20W USB-C (P2-12-MF3-2U)
CRST 1U 10-Outlet Metered & Front-Switched Rack Mount Surge PDU (R1-10S-MS3)
Picking the right one.
A few things worth getting right before you buy. None of it is brand-specific โ these are the fundamentals of a power strip that lasts.
Outlets & spacing
Count the plugs you actually run at once, then add headroom. Widely spaced or angled outlets matter as much as the count โ bulky wall-warts can block neighbors on tightly packed strips.
Surge rating & VPR
Joules tell you absorption capacity, but clamping voltage (VPR) and response time decide what reaches your gear. A lower VPR clamps a spike sooner โ read both, not just the headline joule number.
Cord length & gauge
Gauge is the wire thickness. 14AWG copper carries more current with less heat and voltage drop than thinner 16AWG โ it matters for power tools and long runs. Pick a length that reaches without coiling.
Mounting
Keyhole slots or a metal housing let a strip live on a wall, bench, or under a desk instead of underfoot. A mountable unit keeps cords off the floor and away from spills and foot traffic.
Certification
Look for a real NRTL mark โ ETL/SGS ยท UL1363 & UL1449 โ not a self-declared claim. NRTL listing means an OSHA-recognized lab tested the unit against the U.S. safety standard for power strips and surge protectors.
Heavy-Duty Metered, Filtered & Rack-Mount Metal Power Strips FAQ.
How many joules do I need? +
14AWG vs 16AWG — does gauge matter? +
Can I mount these on a wall or bench? +
What does NRTL certification mean? +
Do these work with 20A circuits? +
Not sure which to pick?
Every CRST strip is certified, insured, and built on real copper. Talk to us or read the buying guide and we will point you to the right one.



