CRST 1U 11-Outlet Filtered & Front-Switched Rack Mount PDU (R1-11S-F2)

Purpose-built for 19-inch audio studios, network closets, and broadcast racks, the 1U R1-11S-F2 pairs 10 rear outlets (individually controlled by 10 front lighted switches) with 1 front convenience AC outlet, 2-stage EMI/RFI line filtering, and 2100J surge protection.

$89.00
In stock โ€” ships from California within 24h · arrives in 3–7 business days
New-customer offer10% off your first order โ€” unlocks right here

Key Features

  • 10 Switched Rear Outlets + 1 Front Outlet
  • 10 Front Manual Switches + Guarded 15A Breaker
  • 2-Stage EMI/RFI Filtering & 2100J Surge Defense
  • 1U 19-Inch Rack & Vertical Under-Desk Brackets
See all featuresHide details
  • 10 Switched Rear Outlets + 1 Front Outlet

    Keep permanent rack cabling hidden inside the cabinet while leaving 1 front socket open for test gear or laptops.

  • 10 Front Manual Switches + Guarded 15A Breaker

    Reboot routers, NAS units, or studio amps individually from the rack face; clear cover protects the master breaker.

  • 2-Stage EMI/RFI Filtering & 2100J Surge Defense

    Attenuates conducted AC line interference and clamps 3-line voltage spikes (500V VPR) with Grounded & Protected LEDs.

  • 1U 19-Inch Rack & Vertical Under-Desk Brackets

    1.5 mm aluminum chassis with spot-welded 3 sq mm copper bus bars includes 4 M6 rack screws & 4 cage nuts.

Specifications
Outlets11 AC (10 rear + 1 front), NEMA 5-15R
Switches10 front switches for the 10 rear outlets + covered master switch
Surge protection2100 Joules, 3-line (L-N, L-G, N-G), 500V VPR, with status lights
Electrical rating15A / 125VAC / 60Hz / 1875W
Overload protection15A resettable circuit breaker
Noise filtering2-stage EMI/RFI filter
Cord length6 ft
Cord rating14AWG/3C
PlugNEMA 5-15P, 45ยฐ angled flat plug
Housing1.5 mm aluminum alloy, 3 mmยฒ spot-welded copper bus bars, phosphor bronze contacts
MountingDetachable brackets: 19" rack (1U) or vertical under-desk; not for flat wall-stud mounting
In the boxRack PDU, 2 mounting brackets, 4 M6 rack screws, 4 M6 cage nuts
Dimensions17.09 x 3.54 x 1.73 in
Weight3.55 lb
Insurance$1M product liability coverage
CertificationETL Listed
Warranty18 months, free 36 months with registration
Volume pricingBulk & wholesale
QuantityYou save
5-1010% off
11+15% off

Discount applies automatically in cart and at checkout.

Buying in bulk? Request a quote

Services & Benefits

Free shipping, no minimum
Every order ships free from our California warehouse — no minimum spend. In-stock orders ship within 24 hours on business days, and standard delivery typically runs 3–7 business days.
Safety certified
Independently certified by an OSHA-recognized NRTL (ETL / SGS) — not a self-declared claim. This product’s exact certifying body and the UL standards it’s listed to are shown in the Specifications.
Up to 36-month warranty
18-month warranty as standard, extended to a full 36 months free when you register your strip.
Worry-free ordering
30-day money-back returns — if it’s our defect, return shipping is on us. Backed by $1M product-liability coverage and lifetime technical support.

Hide 10 Equipment Cords in Back, Toggle Each Device Up Frontโ€”Plus 1 Front Outlet and 2-Stage Filtering

Purpose-built for 19-inch audio studios, network closets, and broadcast racks, the 1U R1-11S-F2 pairs 10 rear outlets (individually controlled by 10 front lighted switches) with 1 front convenience AC outlet, 2-stage EMI/RFI line filtering, and 2100J surge protection.

  • 10 Switched Rear Outlets + 1 Front Outlet: Keep permanent rack cabling hidden inside the cabinet while leaving 1 front socket open for test gear or laptops.
  • 10 Front Manual Switches + Guarded 15A Breaker: Reboot routers, NAS units, or studio amps individually from the rack face; clear cover protects the master breaker.
  • 2-Stage EMI/RFI Filtering & 2100J Surge Defense: Attenuates conducted AC line interference and clamps 3-line voltage spikes (500V VPR) with Grounded & Protected LEDs.
  • 1U 19-Inch Rack & Vertical Under-Desk Brackets: 1.5 mm aluminum chassis with spot-welded 3 sq mm copper bus bars includes 4 M6 rack screws & 4 cage nuts.

Selection & Compatibility Guide: Engineered for 19-inch 1U equipment racks (4 M6 rack screws and 4 cage nuts included) and vertical under-desk suspension (not configured for wall-stud hidden mounting). Rated 125V / 15A / 1875W max combined load. This model focuses on 2-stage EMI/RFI filtering + 11 outlets (10 rear + 1 front) and does NOT include a load readout screen or charging ports. Want a front load display + 3900J surge in 1U instead of EMI filtering and the front outlet? See the R1-10S-MS3.

Key Engineering & Functional Highlights

End the Trade-Off Between Filtered Rack Conditioners and Switched PDUs

Traditional 1U audio power conditioners give you EMI/RFI filtering and a front convenience outletโ€”but tie all rear outlets to a single master switch, forcing you to power down the entire rack or reach into the dark cabinet just to restart one piece of gear. Conversely, basic 10-switch DJ strips skip multi-stage noise filtering and front-panel AC access. The CRST R1-11S-F2 delivers both in a single 1U space.

Clean Rear Cabling + Front-Panel Convenience Access

Ten NEMA 5-15R receptacles on the rear panel keep power cords neatly dressed behind patch panels, switches, and rackmount synths, each mapped to a dedicated lighted rocker switch on the front panel. When you need temporary power for a calibration laptop, camera charger, or test analyzer, plug straight into the 11th front-panel convenience outlet without opening the rear rack door.

2-Stage EMI/RFI Line Noise Filtering & 2100J 3-Line Surge Protection

Inside the shielded metal housing, a two-stage EMI/RFI filtering circuit helps attenuate conducted electromagnetic and radio-frequency noise on shared circuits, backed by 2100 Joules (500V VPR) of UL 1449 Type 3 surge protection across L-N, L-G, and N-G paths. Front-panel Grounded and Surge Protected LEDs verify circuit status instantly.

Guarded Front Master Breaker & Instant Local Hardware Control

Manual lighted switches work instantly with zero network latency, firmware updates, or cloud dependenciesโ€”ideal when rebooting the very modem or router that provides your internet. On the left side of the faceplate, the recessed 15A resettable overload circuit breaker sits under a clear hinged cover so a stray cable or knee never drops power to the whole rack.

Heavy-Duty 1U Aluminum Chassis with Included M6 Rack Hardware

Constructed from 1.5 mm extruded aluminum with spot-welded 3 sq mm internal copper bus bars, phosphor bronze contacts, and a rear-exit 6 ft 14 AWG cord with a 45-degree flat plug. Detachable 2 mm steel ears mount horizontally in EIA-standard 19-inch 1U racks using the 4 included M6 rack screws and 4 M6 cage nuts (90 mm / 3.54 in chassis depth) or rotate 90 degrees for vertical under-desk installation.

Built For Demanding Applications

Home & Project Recording Studio Racks

Sequence preamps, compressors, rack synths, and active monitors manually from the front panel while keeping AC cords routed cleanly behind audio patchbays and using the front socket for guest pedals or laptops.

Small-Business Network Closets & AV Credenzas

Hard-reboot an unresponsive cable modem, NVR, or Apple TV via labeled front switches without disturbing core switchesโ€”and plug your diagnostic laptop right into the front panel.

Under-Console Broadcast & Podcast Desks

Rotate the 2 mm mounting brackets vertically to suspend the R1-11S-F2 beneath a studio desk so 10 lighting, camera, and audio switches sit right at fingertip reach while cords stay tucked underneath.

Compare Related CRST Models

  • CRST R1-10S-MS3: Want a live front 5-group load meter (W/V/A/PF/kWh) and 3900J surge protection in 1U instead of EMI/RFI filtering and the front outlet? Choose the R1-10S-MS3.
  • CRST P2-6S-MF3-2U: Want BOTH EMI/RFI filtering AND a load meter plus covered individual switches in a 2U front-outlet bar? View the P2-6S-MF3-2U.
  • CRST P2-12-MF3-2U: Need 12 front-accessible filtered outlets with load readouts for a wall or 2U rack? See the P2-12-MF3-2U.

Compare R1-11S-F2 vs. R1-10S-MS3 โ†’

FULL SPECS

Specifications.

Outlets11 AC (10 rear + 1 front), NEMA 5-15R
Switches10 front switches for the 10 rear outlets + covered master switch
Surge protection2100 Joules, 3-line (L-N, L-G, N-G), 500V VPR, with status lights
Electrical rating15A / 125VAC / 60Hz / 1875W
Overload protection15A resettable circuit breaker
Noise filtering2-stage EMI/RFI filter
Cord length6 ft
Cord rating14AWG/3C
PlugNEMA 5-15P, 45ยฐ angled flat plug
Housing1.5 mm aluminum alloy, 3 mmยฒ spot-welded copper bus bars, phosphor bronze contacts
MountingDetachable brackets: 19" rack (1U) or vertical under-desk; not for flat wall-stud mounting
In the boxRack PDU, 2 mounting brackets, 4 M6 rack screws, 4 M6 cage nuts
Dimensions17.09 x 3.54 x 1.73 in
Weight3.55 lb
Insurance$1M product liability coverage
CertificationETL Listed
Warranty18 months, free 36 months with registration

WE CUT BOTH OPEN

Look the same. Not built the same.

Side by side, you can’t tell them apart — same enclosure, same outlet count. The difference is everything inside, so we cut both open.

CRSTBuilt to the standard
CRST exterior
Same footprint, same outlets
CRST one-piece copper bus bars
One-piece copper bus bars
CRST thermal-fused MOV
Thermal-fused MOV, rated joules
CRST clean solder joints
Full, clean solder joints
Typical look-alikeBuilt to a price
Look-alike exterior
Looks identical from the outside
Look-alike copper-clad aluminum
Thin copper-clad aluminum
Look-alike missing surge part
Missing / undersized surge part
Look-alike cold joints
Cold, twisted joints

Both units share the same enclosure and outlet count — the difference is inside. Certified CRST units use one-piece copper bus bars, a thermal-fused MOV, and full solder joints; uncertified look-alikes commonly substitute copper-clad aluminum, omit the thermal fuse, and leave cold joints.

What we cut openCertified CRSTUncertified look-alike
Bus barsOne-piece copper barThin copper-clad aluminum
Surge component (MOV)Thermal-fused, rated joulesMissing or undersized, no thermal fuse
Solder jointsFull, clean jointsCold, twisted joints

CUSTOMER REVIEWS

What buyers say.

PRODUCT FAQ

Common questions.

How are the 11 outlets controlled on the R1-11S-F2?
The 10 rear-panel outlets correspond individually to the 10 lighted manual switches on the front panel, while the 15A guarded master breaker controls overall unit power including the front-panel convenience outlet.
Does the R1-11S-F2 have a voltage or wattage readout screen?
No. In the R1-11S-F2, that front-panel space is dedicated to the 11th front convenience AC outlet and the 2-stage EMI/RFI filtering architecture. If you prefer a live front 5-group load display (W, V, A, PF, kWh/hours) and 3900J surge protection in 1U, choose our R1-10S-MS3.
Is this an automatic sequential power conditioner (time-delayed sequencer)?
No. The 10 front switches are manual lighted switchesโ€”allowing you to sequence equipment manually in whatever order you choose (for example, turning preamps on before power amplifiers) without automated relay delays.
How deep is the unit inside a 19-inch rack, and are rack screws included?
The aluminum chassis is 90 mm (3.54 inches) deep (excluding rear plug clearance), fitting shallow wall-mount network cabinets and studio slant racks, and comes with 4 M6 rack screws and 4 M6 cage nuts.
Can I mount the R1-11S-F2 underneath a desk instead of inside a rack?
Yes! The detachable 2 mm steel mounting ears can be oriented vertically (90 degrees to the faceplate) so you can screw the unit cleanly to the underside of a wooden studio desk or workbench.
Will the 2-stage EMI/RFI filter eliminate ground-loop hum in audio setups?
A 2-stage EMI/RFI filter attenuates high-frequency electromagnetic and radio-frequency interference conducted on the AC power line, while connecting all audio gear to a shared, properly grounded rack bus helps maintain clean power distribution. However, 60 Hz ground-loop hum caused by unbalanced signal cables or improper studio grounding may still require balanced interconnects or audio isolation.

Request a bulk quote

Volume discounts apply automatically from 5 units. For larger orders, mixed SKUs, or a PO, send it here.

CRST 1U 11-Outlet Filtered & Front-Switched Rack Mount PDU (R1-11S-F2) SKU R1-11S-F2

We reply within one business day. Prefer email?info@crsttech.com