NewCRST Pro Series

Power, measured.

Six metal power strips and rack PDUs with a live load meter, EMI/RFI filtering and up to 3900 J of surge protection. Built for benches, racks and the wall behind them.

  • Live load meterOn 5 of 6 models
  • Surge protectionUp to 3900 J
  • EMI/RFI filterUp to 3-stage
  • Per-outlet switchesOn 4 models
  • Metal housingRack, wall or bench
  • ETL ListedUL 1363 & UL 1449

Live load meter

Stop guessing what your circuit carries.

On five of the six models. No app, no Wi-Fi, nothing to set up.

Close-up of the front-panel meter reading 288.0 W, 120 V, 2.5 A, power factor 0.96, 1.87 kWh and 6.50 hours

Features

The details that make it Pro.

Filtered. Then protected.

Up to 3900 joules across all three lines, with a 500 V clamping rating. Filtered models add a multi-stage EMI/RFI filter.

Every outlet. Its own switch.

Four models give each outlet a switch on the front. Power-cycle one device without touching the rest.

Three ways to mount.

P-Series brackets face forward for a 19-inch rack, back for a wall or bench, or tuck in on 16-inch studs.

A true 20 A.

The P2-7SX carries 20 amps on a 12 AWG cord. Its T-slot outlets take 15 A and 20 A plugs. It needs a 20 A wall outlet.

20 W USB-C, built in.

USB-C and USB-A on the P2-6S and P2-12. 20 W max, shared between the two ports. They switch off with the master.

Hard to bump.

The master switch sits recessed under a clear cover, with a low-glow light for dark rooms. It is also the resettable breaker.

Under the cover

You're buying the parts you can't see.

Two strips can look the same and be built nothing alike. This is what is inside every Pro Series model.

  1. 1.5 mm

    Aluminum alloy housing

    A rigid metal body that shrugs off shop abuse.

  2. 3 mmยฒ

    Copper bus bars, spot-welded

    One continuous current path. Welded joints, not push-fit ones.

  3. CuยทSn

    Phosphor bronze contacts

    Springy contacts that keep their grip on the plug.

  4. GND

    Grounded chassis

    The metal housing is tied to ground.

The lineup

Six configurations. One standard.

Shown at the same scale. Every model: metal housing, 6 ft cord, covered master breaker, mounting brackets, ETL Listed.

P-SeriesOutlets on the front. For benches, walls and racks.

P2-6S-MF3-2UFlagship

P2-6S

Everything on one panel: six switched outlets, meter, filter and USB-C.

  • 6 switched outlets
  • 3900 J
  • Meter
  • 3-stage filter
  • USB-C 20 W

$99.99

Full specs

P2-12-MF3-2UMost outlets

P2-12

Twelve outlets in two rows, with meter, filter and USB-C.

  • 12 outlets
  • 3900 J
  • Meter
  • 3-stage filter
  • USB-C 20 W

$99.99

Full specs

P2-7SX-MS320 A

P2-7SX

Seven switched T-slot outlets on a 20 A, 12 AWG cord. Needs a 20 A wall outlet.

  • 7 switched outlets
  • 20 A ยท 12 AWG
  • 3900 J
  • Meter

$79.99

Full specs

P1-7-MS1Slim 1U

P1-7

The meter in the smallest body. Seven outlets, two spaced for adapters.

  • 7 outlets
  • 900 J
  • Meter
  • 1U

$49.99

Full specs

R-SeriesOutlets on the back. 1U rack PDUs with switches up front.

R1-10S-MS3Metered PDU

R1-10S

Ten rear outlets, ten front switches, and a meter for the whole rack.

  • 10 rear outlets
  • 10 front switches
  • 3900 J
  • Meter

$89.99

Full specs

R1-11S-F2Filtered PDU

R1-11S

Ten switched rear outlets plus one on the front, with a 2-stage filter.

  • 10 rear + 1 front
  • 10 front switches
  • 2100 J
  • 2-stage filter

$89.00

Full specs

Free shipping, no minimum ยท Ships within 24 hours from California ยท 30-day returns ยท 18-month warranty, 36 with free registration

Compare

Side by side.

Only the rows where the models differ.

Specification P2-6S P2-12 P2-7SX P1-7 R1-10S R1-11S
Price$99.99$99.99$79.99$49.99$89.99$89.00
Best forStudio, workstationHigh-density bench20 A shop or labDesk, small rackHome lab, IT rackAV and audio rack
Outlets6 front12 front7 front, T-slot7 front10 rear10 rear + 1 front
Circuit15 A ยท 1875 W15 A ยท 1875 W20 A ยท 2500 W15 A ยท 1875 W15 A ยท 1875 W15 A ยท 1875 W
Wall plug5-15P5-15P5-20P5-15P5-15P5-15P
Per-outlet switches6, coveredNo7, coveredNo1010
Load meterYesYesYesYesYesNo
EMI/RFI filter3-stage3-stageNoNoNo2-stage
Surge protection3900 J3900 J3900 J900 J3900 J2100 J
USB chargingUSB-C + A, 20 WUSB-C + A, 20 WNoNoNoNo
Rack height2U2U2U1U1U1U
Mounts onRack, wall, benchRack, wall, benchRack, wall, benchRack, wall, benchRack, under deskRack, under desk
Buy Details Details Details Details Details Details

Ratings are the total for the whole strip at 125 V. For loads that run three hours or more, plan on 80% of the breaker rating. All six are ETL Listed to UL 1363 and UL 1449, with a 6 ft cord and four M6 rack screws and cage nuts in the box.

Find yours

Three questions. One answer.

1Where is it going?

The standard

Certified first. Backed after.

ETL

Listed, not just "tested"

Certified by Intertek, an OSHA-recognized lab, to UL 1363 and UL 1449. The same standards the big brands build to.

How to check a listing
36mo

Warranty that grows

18 months out of the box. Register for free and it becomes 36.

Warranty program
$1M

Product liability coverage

Every Pro Series model is covered by $1,000,000 in product liability insurance.

24h

Out the door in a day

In-stock orders ship from our California warehouse within 24 hours. Free shipping, no minimum. 30-day returns.

Outfitting a shop, a lab or a rack room?

Volume pricing, purchase orders and tax-exempt orders are handled by our business team.

For business

Questions

Before you buy.

Still unsure? Ask our support team. A person answers.

Which model should I pick?

Start with where it goes. For a bench, wall or desk, choose a P-Series model with outlets on the front. For the inside of a 19-inch rack, choose an R-Series PDU with outlets on the back. Then pick by feature: per-outlet switches, outlet count, EMI/RFI filter, or the 20 A rating. The three-question finder on this page does it for you.

Can I plug the 20 A model into a regular outlet?

No. The P2-7SX has a NEMA 5-20P plug, which fits only a 20 A outlet (NEMA 5-20R, the one with a T-shaped slot) on a 20 A circuit. No adapter is included. If you have standard 15 A outlets, choose any of the other five models.

What does the meter show?

The total load of everything plugged into the strip: watts, volts, amps and power factor, plus energy in kWh and running hours for the current session and all-time. It reads the whole strip, not each outlet. It needs no app, Wi-Fi or setup.

What does the EMI/RFI filter do?

It reduces electrical noise carried on the AC line, the kind that motors, chargers and switching power supplies put there. It is not a voltage regulator and not a battery backup. The P2-6S and P2-12 have a 3-stage filter and the R1-11S has a 2-stage filter.

How much can I plug in?

The 15 A models are rated 1875 W at 125 V for the whole strip. The 20 A model is rated 2500 W. For loads that run three hours or more, plan on 80% of the breaker rating: about 1440 W on a 15 A circuit and 1920 W on a 20 A circuit at 120 V. The meter shows where you stand.

How do they mount?

P-Series brackets turn three ways: forward for a 19-inch rack, back for a wall or bench, or tucked in to hide on 16-inch wall studs. R-Series PDUs mount in a 19-inch rack or under a desk. Four M6 rack screws and four cage nuts are included. Wood screws are not, and the desk clamp for P-Series is sold separately.

Are these safety certified?

Yes. All six are ETL Listed by Intertek to UL 1363 (relocatable power taps) and UL 1449 (surge protective devices). Intertek is an OSHA-recognized Nationally Recognized Testing Laboratory.

What is the warranty?

18 months from purchase, extended to 36 months when you register the product for free. Orders also come with 30-day returns and free shipping with no minimum.

CRST Pro Series

Power, measured.

First order?